Publicidad
Idiomas disponibles
Idiomas disponibles
The interior of the machine is completely mainte-
nance-free.
Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consum-
ables.
Wear parts*: grinding medium, Carbon brushes, sharp-
ening wheel, angle gauge, v-belt
* Not necessarily included in the scope of delivery!
Spare parts and accessories can be obtained from our
service centre. To do this, scan the QR code on the
cover page.
12. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled.
The equipment and its accessories are made
of various types of material, such as metal
and plastic.
13. Trouble shooting
Problem
Motor doesn't start
Machine gets slower
during work.
The wood gets burnt
during sanding.
Strong vibrations
24 | GB
Possible Cause
• ON/OFF switch damaged.
• ON/OFF cable damaged.
• ON/OFF relay damaged.
• Fuse blown.
• Motor burnt.
• Too much pressure put on
the workpiece.
• Sanding disc or belt covered
with grease.
• Excessive pressure on
workpiece.
• loosely mounted tool
• defective tool
• spindle knocks
www.scheppach.com
Defective components must be disposed of as special
waste. Ask your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical and
electronic equipment. Improper handling of waste
equipment may have negative consequences for the
environment and human health due to potentially haz-
ardous substances that are often contained in electri-
cal and electronic equipment. By properly disposing
of this product, you are also contributing to the effec-
tive use of natural resources. You can obtain informa-
tion on collection points for waste equipment from your
municipal administration, public waste disposal au-
thority, an authorised body for the disposal of waste
electrical and electronic equipment or your waste dis-
posal company.
Help
• Replace all damaged parts before you use your
machine again.
• Contact your local service centre. Every attempt
to carry out a repair, can be dangerous if it is not
done by skilled personnel.
• Reduce the pressure on the workpiece.
• Replace disc or belt.
• Reduce pressure on workpiece.
• tighten tool
• change tool
• repair at a Service-Station
Publicidad
