Dustcontrol DC 3800 H Turbo EX Manual Original página 17

Safety-relevant accessories included
Description
Suction hose 38, ESD-certifi ed
Suction hose 50, ESD-certifi ed
Coupling socket 50/50 ESD-certifi ed
Connecting sleeve 38/38 turnable
ESD-certifi ed
Intermediate sleeve 50/38, ESD-certifi ed
HEPA fi lter DC 3800 H Turbo EX
Fine fi lter, Polyester DC 3800 H Turbo EX 42025H
Sealing plug, inlet
Plastic sack, conductive
Floor nozzle 450 A-38 ESD-certifi ed
Warranty
Th e warranty period for this machine is two years and
covers manufacturing defects. Th e warranty is valid pro-
vided that the machine is used in the proper manner for
which it was designed and that it is serviced as required.
Normal wear is not covered by this warranty.
TROUBLESHOOTING
Problem
Motor will not start.
* ) The motor protection should never be changed as the factory setting protects against over-
heating.
Part No. We can supply all safety-relevant spare parts and
wearing parts.
2012E
2013E Dustcontrol UK Ltd.
2107E Old Barn, Home Farm
Business Park
2114E Church Way, Whittlebury,
2120E Northants NN12 8XS
42024H
Tel: 01327 858001, sales@dustcontrol.co.uk,
www.dustcontrol.co.uk
42250H
See the Dustcontrol catalogue for other acces-
42384H
sories.
7236E
DC 3800/5800 H Turbo EX can be ordererd with
antistatic accessories to fulfi l the requirements of
the ATEX Zone 22 directive 1999/92 ATEX 137
Servicing carried out by anyone other than Dustcontrol
or its authorised agent shall automatically void the war-
ranty. No other warranty, express or implied, shall apply.
Fault
Power not connected.
Motor protection tripped. *
DC 3800/5800 H Turbo EX - 17
Solution
Connect power.
) Investigate why the motor has
overloaded and remedy. Note
that if the machine has been
operating with too much
throttle, the motor protection
may have tripped to protect
against overheating. Wait 5
minutes. Reset by fi rst turning
to the 0 position and then to
the starting position.
Part No 94125-G
.