DeWalt DCL040 Manual De Instrucciones página 34

2. For long storage, it is recommended to store a fully charged
battery pack in a cool dry place out of the charger for optimal
results.
NOTE: Battery packs should not be stored completely depleted of
charge. The battery pack will need to be recharged before use.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
FIG. 2
A
E
DESCRIPTION (FIG. 2)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Switch
B. Loop
C. Pivoting head
OPERATION
WARNING: Always observe the safety instructions and applicable
regulations.
WARNING: To reduce the risk of serious personal injury,
turn light off and disconnect battery pack before making
C
any adjustments or removing/installing attachments or
accessories.
B
D
Installing and Removing the Battery Pack
(Fig. 3)
WARNING: To reduce the risk of injury, never depress the battery
release button without removing the battery pack. Depressing the
battery release button without removing the battery pack can result in
the battery pack falling out unexpectedly.
NOTE: For best results, make sure your battery pack is fully charged.
The light will shut off without warning when the battery is fully
discharged.
32
D. Battery pack (not included)
E. Battery release button
FIG. 3
D
E