CleanShot 020244-0 Manual Del Propietário página 12

CleanShot
TM
2050 PSI PressureVVasher
SPEC[FmCAT[ONS
Outlet Pressure ..... 2050 psi
Flow Rate .......... 1.9 gallons per minute (gpm)
Detergent .......... Use detergent approved for
pressure washers
Water Supply ...... Not to Exceed 100°F
Automatic Cool .... Will cycle when water
Down System reaches 125°. 155°F
Shipping Weight .... 54 Ibs.
GENERAL
HAINTENANCE
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negligence.To
receNe full value from the warranty, the operator must
maintain the pressure washer as instructed in this manual,
NOTE: ShouJd you have questions about repJadng
components on your CleanShot
TM
pressurewasher, please
call 1-800-743-4115 for assistance.
° Some adjustments will need to be made periodically to
properly maintain your pressure washer.
° All maintenance in this manual and the engine owner's
manual should be made at least once each season.
° Once a year you should clean or replace the spaH<plug
clean or replace the air filter and check the spray gun and
adjustable nozzle extension assembly for wear.A new spark
plug and clean air filter assure proper fuel-air mixture and
help your engine run better and last longer. Please refer to
your engine owner's manual for more details.
° If equipped with inflatable tires, keep the air pressure at
the value marked on the tire or within 15 and 40 psi.
Before Each
Use
* Ched< engineoillevel.
o Check water inlet screen for damage.
o Check in4ine filter for damage.
o Check high pressurehose for leaks.
o Check chemical injection hose and fiker for damage.
° Check spray gun and adjustable nozzle extension
assembly for leaks.
o Rinse out garden hose to flush out debMs.
PRESSURE WASHER
HA[NTENANCE
Check and Clean inlet Screen
Examine the screen on the water inlet. Clean it if the
screen is clogged or replace it if screen is damaged.
Pressure Hose
The high pressure hose can develop leaks from wear,
kinking, or abuse. Inspect the hose each time before using
it. Check for cuts, leaks, abrasions or bulging of cover,
damage or movement of couplings. If any of these
conditions exisL replace the hose immediately.
WARNING
NEVER repair high pressure hose, Replace iL
Replacement hose rating MUST exceed maximum pressure
rating of unit.
Check Chemical [n_ection Hose
Examine the filter on the detergent tube and dean if
clogged.The tube should fit tightly on the barbed fitting.
Examine the tube forleaks or tears. Replace the filter or
tube if either is damaged.
Check Gun and Adiustab[e Nozzle
Examine the hose connection to the spray gun and make
sure it is secure.Test the trigger by pressing it and making
sure it "springs back" into place when you release it. Put
the trigger lock in the ON position and test the trigger.
You should not be able to press the trigger.
12