Olsberg CTSC 14/522 Instrucciones De Montaje página 34

Electronic controls CTSC
The CTSC electronic controls comprise an operating
element (Fig. 10) integrated into the front of the appli-
ance at the top right, and a control unit (Fig. 11) lo-
cated in the control panel cavity. It is fully wired, and
both the day and Central European Time (GMT+1)
have already been pre-set. As soon as the appliance
has been connected to the mains power supply, the
CTSC will automatically carry out a self-test, during
which the LCD display, the LED control lights and the
backlighting will be activated.
completed after a few seconds, and the standard dis-
play will appear (see operating manual, chapter on
"Electronic controls, CTSC - standard display").
Important: Please check the time and, if necessary,
reset it to your own time zone (see oper-
ating manual, "Day/time" chapter).
Core sensor connection
DIP switch
Room temperature sensor
connection
34
The self-test will be
Fig.11 Control unit
Fig.10 Operating element
LCD-display
LED-
control lights
Interface
Operating
element
Power supply
Inlets and
outlets