Publicidad
Idiomas disponibles
Idiomas disponibles
◾
The rinse nozzle is connected to the gun directly (Fig. 7b).
To connect, insert the rinse nozzle into the outer ring of the quick-coupler end
of the gun until you hear a "click". The outer ring of the quick-coupler will move
forward automatically, which indicates the connection is established. Tug on the
nozzle to make sure it is securely attached.
To disconnect, pull back the outer ring of the quick-coupler, and then pull out the
rinse nozzle.
7b
Rinse Nozzle
WARNING:
hand when disconnecting the nozzle from the gun. Personal injury may result if the
nozzle jumps out.
Use the table below to pick the right nozzle for the job.
NOZZLE SELECTION
Red 0° Nozzle
(sold separately)
Yellow 15° Nozzle
Green 25° Nozzle
White 40° Nozzle
Gray Rinse Nozzle
Turbo Nozzle
22
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC
Always hold the gun with one hand and the nozzle with the other
APPLICATIONS
Powerful cleaning at close range for metal or concrete
surface. DO NOT USE ON WOOD.
Clean small metal, concrete, or wood surfaces.
Clean larger metal, concrete, or wood surfaces.
Clean wide metal, concrete, wood, or vinyl surfaces.
Rinse vehicles. Rinse the detergent off of metal, concrete,
wood, or vinyl.
Clean hard surfaces only. To prevent surface damage, do
not use on cars and wooden surfaces.
Publicidad
