Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING WITH DETERGENT
(Fig. 13)
WARNING:
specifically made for use with pressure
washers. Comply with the application,
disposal, and safety instructions of the
detergent manufacturer.
1. Turn the bottle of the foam cannon
counterclockwise and remove it
(Fig. 13a).
2. Pour detergent into the bottle.
NOTICE:
The temperature of the detergent should not exceed 140 °F (60 °C).
3. Replace the foam cannon and connect it to the quick-coupler of the gun.
4. Rotate the detergent knob to adjust
the amount of detergent added to
the water flow according to your
needs (Fig. 13b).
5. Open the water faucet or immerse
the siphon hose filter and quick-
coupler joint fully into the water
bucket, start the pressure washer
and spray the detergent on a
dry surface using long, even,
overlapping strokes. To prevent
streaking, do not allow detergent to dry on the surface.
NOTE:
It is recommended to select low speed for gentle cleaning.
30
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC
Only use detergents
13a
b
13b
a
Detergent
Knob
Publicidad
