Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
When the pressure washer is powered on but with no further actions, the
washer will turn off automatically after 5 minutes of standby. During the first several
minutes of standby, the speed indicator on the pressure washer will flash three green
lights, which indicates there is no water flowing into the siphon hose.
6. Hold the gun with both hands,
press the unlock side of the lock-
off button and then squeeze the
trigger until a steady water flow is
produced.
NOTE:
If the lance is connected, hold the
gun with one hand and the lance with the
other hand.
7. Start spray washing.
NOTE:
It may take some time for the
water to travel from the source and come
out of the nozzle as a steady spray. To achieve a steady water flow quickly, you may
want to:
a. Remove the nozzle.
b. Press the trigger and wait until a steady water stream starts coming out of the
wand.
c. Release the trigger and re-install the nozzle.
WARNING:
distance of 11-3/4" (30 cm) in order to avoid damages by the high-pressure jet. The
first indication of damage is the discoloration of the tire. Damaged car tires or tire
valves present a risk of injury.
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC
Car tires and/or tire valves may only be cleaned from a minimum
11
b
c
a
27
Publicidad
