Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
WARNING:
product before servicing, cleaning, changing attachments, or removing material from
the product.
APPLICATION
You may use this product for the purposes listed below:
◾
Cleaning dirt on automobiles, walls, floors, etc.
INSTALLING/REMOVING BATTERY PACK (Fig. 10)
Charge the battery pack(s) before first use!
NOTE:
The pressure washer can be powered by one or two battery packs. Using two
battery packs gives you a longer run time and efficient power draw managed by PEAK
POWER™ technology.
NOTE:
Using one battery pack will not allow you achieve TURBO speed. For best
performance, we strongly recommend use of two 5.0Ah or greater Ah battery packs.
1. The battery pack compartment cover is hinged. Raise the cover by lifting the
front of the cover.
2. Align the grooves in the battery
pack with the raised ribs in one
of the battery compartments, and
then insert the battery pack into the
compartment (Fig. 10a).
3. Push the battery pack until you
hear a "click". The battery-release
button will spring up when the
battery pack is securely attached.
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC
Do not allow familiarity with this product to make you careless.
Do not use any attachments or accessories not recommended by the
To prevent serious personal injury, remove the battery pack from the
10a
Battery
Compartment
Cover
25
Publicidad
