Descargar Imprimir esta página

Roadstar HIF-1850TUMPK Manual De Instrucciones página 7

Ocultar thumbs Ver también para HIF-1850TUMPK:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Note: Do not stop or turn the platter manually. Moving or jarring the turntable without
securing the Tonearm clamp could result in damage to the Tonearm. Put the protecti-
ve cap on the stylus when not in use.
CD-MP3 OPERATION
1. Select "CD" by turning the [FUNCTION KNOB] (14);
2.
Press
[OPEN/CLOSE] (21) to
up in the CD compartment.
3.
Close the CD door (8). Focus search is performed and playback will start auto-
matically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (22);
2. Press [PROGRAM] (15), the display will show "P01" and flash;
3. Select desired track by using [SKIP +/-] buttons (23/24);
4. Press [PROGRAM] (15) again to confirm desired track into the program
memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (16) to play
the disc in the order you have programmed.
Note:
Press [STOP] (22) twice to terminate programmed play.
USB OPERATION
1. Select "CD" by turning the [FUNCTION KNOB] (14);
2. Plug an USB device into the USB socket (7);
3.
Playback will start automatically from the first track.
Note: If there is a CD inside please remove it, as it has the priority over the USB
function.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Note: Some mp3 player may not be able to play via the usb socket. this is not a maul-
function of the system.
Note: To avoid damage to USB memory, remove it only when the radio is turned off.
TAPE OPERATION
1. Select "TAPE" by turning the [FUNCTION KNOB] (14);
2. Insert a cassette TAPE into the Mechanism (6);
3. The system will start playback automatically;
Press [TAPE FORWARD/EJECT] button (5) half way during playback to start ra-
pid tape winding in forward direction.
Slightly press the [TAPE FORWARD/EJECT] button (5) again to resume play-
back.
Press the [TAPE FORWARD/EJECT] button (5) completely inwards and the cas-
sette tape will be ejected.
open the CD door (8) and place a CD with the label
English
3

Publicidad

loading