THOMSON THFP3510G Manual De Usuario página 23

BEFORE USING THE PASTRY PROBOT
Before assembling the robot, make sure the power cord is unplugged from the
power outlet and the speed selector is in position 0.
1. By pressing the tilt button, the head of the device automatically releases
and locks in the raised position.
2. Select the desired accessories, which depend on the task to be performed:
beater for mixing and beating the egg, dough hook for kneading, whisk for
beating and frothing the egg white.
Directly insert the beater/dough hook/whisk until it locks. turning it counter-
clockwise until the pins engage and the accessory locks firmly.
Note: Make sure the beater, dough hook or whisk is fully inserted into the
socket, otherwise your mixing results may be affected. (fig.1) To place it, Place
the bowl in the place assigned to it. First place the bowl on the base, then turn
the bowl clockwise until it locks into position (see fig.2).
3. To lower the head and place the mixer/dough hook/beater in the bowl by
holding the head with one hand and gently lowering the head. A click is
heard when the head has reached the correct position.
4. Make sure the bowl lid is in place
Fig. 1 Fig. 2
EN-9