otherwise, when you lift the mixer head, the beater or whisk or a dough
hook will engage in the mixer bowl; if the beater or whisk or dough hook
rests on the front of the mixer head, you must turn the speed selector
back on, let the beater run for a few seconds, then turn the speed
selector off to stop the beater or whisk or dough hook on both sides of
mixer head.
6. If necessary, you can remove excess mixture from the beaters or
dough hooks with a plastic spatula.
7. Pull the beater/dough hook/whisk with a little force. It is recommended
to hold the accessory firmly to remove it more easily. Warning: The
speed selector must be in position 0 and the power plug must be
unplugged before removing the accessories.
CLEANING AND MAINTENANCE
1. Unplug the appliance and wait until it has completely cooled down
before cleaning it.
Warning: the blender cannot be immersed in water or any other liquid.
2. Wipe the outer surface of the head and base with a damp cloth and
buff with a soft, dry cloth.
3. Wipe any excess food particles from the power cord.
4. Immerse the bowl, beater, spatula, dough hook and whisk
in warm soapy water for thorough cleaning. Then rinse under running
water and pat dry. Please note that the accessories are not dishwasher
safe.
EN-11