Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Wall mount the camera unit
1
4
1.
Mark the positions of 2 screw holes on the wall. Drill a screw hole at each
marking.
2. Install the supplied wall anchors into 2 screw holes on the wall.
3. Insert the supplied wall mounting screws into the wall anchors.
4. Fix and fasten the underside of the baby (camera) unit and the wall mount
bracket with the supplied separate screw.
5. Hang the wall mount bracket on the wall mounting screws on the wall.
6. Adjust the camera manually if necessary.
Note
The pack includes a power adapter with a longer cord which is beneficial for
wall mount application, where your wall socket is far from the camera.
4
32.5mm
(1.28")
2
28.2mm
5.8mm
5
3
25mm
4.1mm
Publicidad
