cecotec BOLERO DRESSCODE 7000 DN Manual De Instrucciones página 41

ENGLISH
Spin speed (3)
1. Select a programme.
2. Press this button to select the desired speed.
1000: 0-400-600-800-100
1200: 0-400-600-800-1000-1200
1400: 0-400-600-800-1000-1200-1400
Mute Mode
1. Select a programme.
2. Press and hold the Delay button for approx. 3 seconds. No beeps shall be heard.
3. To reactivate the sound, press the Delay button again for about 3 seconds.
Note: the setting will be saved until next restart.
Child Lock function
1. Select a programme.
2. Press the "Pause/Start" button
3. Press the "Extra Rinse" and "Spin Speed" buttons at the same time for about 3 seconds.
Note:
- When the child lock is activated and the washing programme starts, the display will
alternately show "CL" and the remaining time of the washing cycle.
Pressing any button will cause the indicator to flash.
-
- When the wash cycle is finished, "Cl" and "END" alternate on the display.
- Press and hold both "Extra Rinse" and "Spin Speed" buttons to unlock the function.
- This function locks all buttons except the Start/Pause button and the child lock button
itself.
- Deactivate the child lock function before selecting a programme and starting washing.
Tips for use
- After a programme is completed, wait for two minutes before opening the door.
- Check whether the water inside the drum has been drained before opening its door. Do not
open the door if there is any water.
- Do not wash only one piece of clothes or garment, as these could cause great unbalance.
Always introduce at least 3 or 4 clothes so that draining can be done smoothly.
- The information given for the programmes different to the eco 40-60 programme are just
indicative.
- The eco 40-60 programme can clean normally soiled cotton clothes declared as washable
at 40ºC or 60ºC, together in the same cycle. This programme is used to assess compliance
with EU eco-design legislation.
80
BOLERO DRESSCODE 7000 DN
- The times indicated for each programme match the length with standard loads and
temperatures. Other loads and temperatures will need different programme length.
- The most efficient programmes in terms of energy consumption are generally those that
are carried out at lower temperatures and longer length.
- Load the washing machine to the quantity estimated for each programme, this will help
you save energy and water.
- The length, and energy and water consumption of each programme may vary according
to the weight and type of laundry, the additional functions active, water, and ambient
temperature.
- It is recommended the use of liquid detergent for washing programmes at low temperature.
You can vary the quantity of detergent according to the quantity of laundry and its soiling
level. Follow the detergent manufacturer recommendations for the quantity of detergent
you must use.
- You can find more information on this model by scanning the QR code of the reference of
your product (you will also find the energy label).
Product Bolero DressCode 7000 DN
Reference: 02791
QR code
5. CLEANING AND MAINTENANCE
Warning
- Before cleaning or repair tasks, unplug the appliance from the mains and close the water
tap.
- Proper maintenance on the washing machine can extend its working life. The surface can
be cleaned with diluted non-abrasive, neutral detergents if necessary. If there is any water
overflow, use a cloth to wipe it off immediately.
- Do not use abrasive cleaners or scouring pads to clean the device.
Cleaning the drum
- The rusts left inside the drum by the metal articles shall be removed immediately with
chlorine-free detergents.
- Do not use steel wool.
ENGLISH
81
BOLERO DRESSCODE 7000 DN