Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please contact with an Authorised Service Centre.
The appliance does not turn on or does not heat up
Problem
You cannot activate or operate the appliance.
The appliance does not heat up.
The appliance does not heat up.
The appliance does not heat up.
The appliance does not heat up.
Components
Problem
The lamp is turned off.
The lamp does not work.
The Food sensor does not operate.
Error codes
The display shows...
26
ENGLISH
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if...
The appliance is correctly connected to an electrical
supply.
The automatic switch-off is deactivated.
The appliance door is closed.
The fuse is not blown.
The Lock is off.
Check if...
Moist Fan Baking - is turned on.
The lamp is burnt out.
The plug of the Food sensor is fully inserted into the
socket.
Check if...
Step 3
Put a cloth on the bottom of the cav‐
ity.