Fisher Scientific Fisherbrand Isotemp Instalación Y Operación página 15

Start-Up Procedure
Control Panel FBV18FPSA
Operations
Once the unit is turned on, the display screen will display.
The unit will run on Setting automatically
Front Panel Command
To display target set point; in programming
mode it selects a parameter or confi rm an
operation.
(UP) To view the latest alarm occurrence;
in programming mode it browses the
parameter codes or increases the display
value.
(DOWN) To view the latest alarm
occurrence; in programming mode
it browses the parameter codes or
decreases the display value.
To switch the instrument on and off , if
onF=oFF.
Not enabled.
Not enabled.
Key Combinations:
+ To lock & unlock the keyboard.
+ To enter in programming model
+ To return to the room temperature
display
Function of LED:
LED MODE
ON
Flashing
ON
ON
ON
ON
°C/°F
Flashing
°C/°F
FUNCTION
Compressor enabled
Anti-short cycle delay enabled
Defrost enabled
An alarm is occurring
Continuous cycle is running
Measurement unit
Programming phase
15