Descargar Imprimir esta página

Fisher Scientific Fisherbrand Isotemp Instalación Y Operación página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

How to Unlock the Keyboard
Hold the
and
keys together for more than 3s, till
the "POF" message is displayed.
The ON/OFF Function
With "onF = oFF", pushing the
ON/OFF key, the instrument is
switched off . The "OFF" message is
displayed. In this confi guration, the
regulation is disabled. To switch the
instrument on, push again the ON/OFF
key.
WARNING: Loads connected to the
normally closed contacts of the relays
are always supplied and under voltage,
even if the instrument is in stand by
mode.
Restart Procedure
If unit is unplugged or turned off , allow 5 minutes before
restarting or plugging it back in.
How to Save Energy
Be sure to follow location suggestions as mentioned in the
Installation.
• Wipe moisture from glassware or other materials before
placing them in a unit.
• Don't overcrowd the unit. Too many items can increase
electrical energy demand in order to keep everything
cool.
• Close the door as soon as possible in hot, humid
weather.
• Make certain that the door is closed tightly.
• Keep containers covered, when possible, to reduce
moisture buildup.
• Set operating temperature no colder than necessary for
the items being refrigerated.
Safety Tips
CAUTION: After a unit is in operation, do
not touch the cold surfaces, particularly
when hands are damp. Skin may adhere to
the cold surfaces.
WARNING: We recommend handling
samples by wearing gloves to avoid frost
bite.
WARNING: Never disconnect your unit by
pulling the power cord. Always grip the plug
securely and pull straight out from the outlet
.
WARNING: Do not use a power cord that
shows cracks or abrasions. Have a qualifi ed
electrician repair or replace damaged cords
immediately.
17

Publicidad

loading