KTM A54003990544 Instrucciones De Montaje página 20

5 ASSEMBLY
5.1
8
Assembly
502096-01
502097-01
502098-01
502099-01
502100-01
Preassembly
It is a good idea to have assistance when carrying out the follo-
wing steps.
–
Position engine guard
–
Mark the position of the left and right of the small rubber
A
buffer with a pencil
Info
The rubber buffers serve as a support for the engine
guard and as a base for the retaining brackets.
Assembly
–
Mount the small rubber buffer
7
cable ties (included) on the front frame.
–
Mount the small rubber buffer
7
cable ties (included) on the rear frame.
Info
The rubber buffer can be split in two here, as it
only serves as a support for the engine guard.
–
Mount the large rubber buffer
7
cable ties (included) on the rear cross member.
–
Position engine guard
–
3
Position catch (included) on large rubber buffer
–
4
Fit screws (included), but do not tighten yet.
1
(included).
.
5
(included) with small
5
(included) with small
6
(included) with large
1
.
6
.