L.B.White Sentry ST80 Manual Del Usuario E Instrucciones página 2

2
Sentry Tube Heaters
Heater Specifications ......................................................................................................4
General Information ........................................................................................................5
Safe Clearance From Combustibles ...............................................................................5
Safety Precautions .........................................................................................................6
Inlet Air Requirements ....................................................................................................9
General Installation Instructions ...................................................................................10
Start-Up Instructions .....................................................................................................17
Shut-Down Instructions ................................................................................................17
Cleaning Instructions ....................................................................................................18
Maintenance Instructions ..............................................................................................19
General Service Instructions ........................................................................................19
Troubleshooting Information .........................................................................................26
Electrical Connection and Ladder Diagram ..................................................................30
Service Parts Identification Schematic - Tube/Reflector ...............................................32
Parts List - Tube/Reflector ............................................................................................33
Service Parts Identification Schematic - Burner Box ....................................................34
Parts List - Burner Box .................................................................................................35
Warranty Policy.............................................................................................................36
Standard products are manufactured to operate at optimum efficiency at
elevations between 0 and 2000 ft. above sea level.
If operated at higher elevations the product will not function correctly and may
function in an unsafe nature. Products providing proper operation for alternate
elevations may be available.
If you require a high elevation product, did not specify when ordering, and/or
the box this unit came in does not have an alternate altitude designation
sticker please contact technical support.
Owner's Manual • Sentry
TABLE OF CONTENTS
WARNING