1. Empty the Cyclonic Dust Container
when the vacuumed dirt reaches the
MAX level or whenever you decide to.
Press the lever
the
Dust
on
Cyclonic
Container
and remove it from the
vacuum cleaner.
(_
Hold the Cyclonic Dust Container over
a
trash can and press the release button
to open the bottom of the Cyclonic Dust
Container as shown. Shake the Cyclonic
Dust Container to expel loose dust and
dirt.
If
the
Dust container
desired,
Cyclonic
can be washed with plain water.
Remove the top of the Cyclonic Dust
Container by rotating it counterclockwise
and clean the inside.
5. Let the tank air dry in a ventilated area
until completely dry.
When dry,
Cyclonic
reassemble the
Dust Container by replacing the top and
rotating it clockwise.
Hold the handle of the Cyclonic Dust
Container and push it into the vacuum
cleaner until it clicks and locks into
place.
,
®
®
1t