Vacmaster Respira UC0501 Manual De Uso Y Cuidado página 14

5. Choose the desired accessory and insert into the wand.
NOTE: You can also choose to use your vacuum cleaner by inserting the
combination tool directly into the hose.
6. Plug the power cord into an outlet located near the floor.
7. Press the power button to turn the vacuum cleaner on.
8. Once you have completed vacuuming, press the power button again. Remove
the accessory and unplug the power cord plug from the outlet.
IMPORTANT: Make sure to re-insert the hose end into the lower hose
connection before using the vacuum in uprignt mode.
CAUTION
When using accessories, be careful not to overextend the hose when reaching to
avoid tipping the vacuum over.
CAUTION
DO NOT pull the vacuum cleaner around the room by the hose. Property damage
or personal injury could result.
3-in-1 Combination Tool
3-in-1 Combination Tool
-14-