Vacmaster Respira UC0501 Manual De Uso Y Cuidado página 15

Accessory
3-in-1 Combination Tool
The 3-in-1 combination tool can be attached to the end of the wand and the hose.
Use the 3-in-1 combination tool in crevice tool mode for cleaning in tight spaces
such as furniture, between cushions, and stairs.
Set the combination tool in dusting brush mode by pressing the release button
and sliding the dusting brush side of the brush tool to the end of the combination
tool. Use in dusting brush mode for cleaning loose surfaces such as drapes.
Press the release button to remove the brush tool. Set the combination tool in
upholstery brush mode as shown. Use in upholstery brush mode for cleaning
fabric surfaces such as fabric sofa.
To return the combination tool to crevice tool mode, press the release button and
slide the brush tool down the combination tool.
NOTE: Always clean accessory before using on fabrics.
Storing your vacuum
1. Ensure the hose is locked into place and the accessory is stored on-board.
2. Gather the cord and wrap it loosely around the upper and lower cord hooks.
Lock the power cord plug onto the power cord.
3. Store the vacuum cleaner in a dry, indoor area, on the floor with the handle
locked in the upright position.
Dusting Brush
Release Button
Upholstery
Brush
-15-