Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2. Intended use for the machine
This product has been designed to cut grass, weeds, bushes and should never be used for any other purpose.
3. Personal protective equipment
The clothing used must be functional and appropriate, that is, it must be tight but without
causing obstacles.
Do not wear jewelry or clothing that could catch on bushes or bushes.
To avoid injuries to the head, eyes, hands or feet, as well as to protect hearing, you must wear
the appropriate protective equipment and clothing during use.
Always wear a helmet where there is a risk of falling objects. The protective helmet should be
inspected at regular intervals for damage and replaced after 5 years at the latest. Use only
approved protective helmets.
The helmet's face shield (or goggles) protects the face from flying debris and stones.
When using the brushcutter, always wear safety glasses or a face shield to protect your eyes
from injury.
Wear appropriate noise protection equipment to prevent hearing impairment such as earmuffs, earplugs, etc.
Overalls are recommended to protect against flying stones and debris..
Always wear special gloves made of thick leather during brushcutter operation as well as sturdy boots with non-slip soles to
protect against injuries and ensure good stability.
4. Starting the brushcutter
Make sure there are no children or other people within a 15m working area, also pay attention
to any animals in the surroundings.
Make sure there are no loose bolts and nuts, fuel spills, cracks, dents, or any other problems
that could interfere with safe driving.Take special care to check that there is no problem with
the blades or with the joints that join the blades to the brushcutter.
Never use blades that are bent, warped, dented, broken, or damaged in any other way.
Keep the blade and edges sharp and opposite sides rounded.
Check the screw to tighten the blade and make sure the blade rotates smoothly without any abnormal noise
The cutting tool is not allowed to rotate when the engine is idling. See your dealer for adjustment.
Check that the handlebar is clean and dry and test the operation of the start and stop switch.
Start the brushcutter only as indicated in the instructions provided in this manual. Do not use any other method to start the engine.
Use the brushcutter and cutting attachments only for their specified applications.
Start the brushcutter engine only after the entire engine has been assembled. It is only allowed to use the machine after having
installed all the appropriate accessories.
Before starting, make sure that the cutting tool is not in contact with hard objects such as branches, stones, etc. because it spins
when it starts up. In the event of any problem with the engine, it must be shut down immediately. Immediately stop the engine and
inspect the cutting tool if it hits stones or other hard objects.
Inspect the cutting tool at short regular intervals for damage (detect hairline cracks by tapping and noticing changes in sound).
6
Publicidad
