Hotpoint Ariston FK 1047L P 0 X/HA Manual De Instrucciones página 32

Programming cooking
GB
! A cooking mode must be selected before programming can take place.
Programming the duration
1. Press the icon.
2. Turn the control dial to set the duration; hold the dial in this position to scroll
through the numbers more quickly and make the setting process easier. The
display will show a graphic indicating the duration in bar format.
3. Once you have reached the desired duration, press the
The duration bar will show the current time, the duration and the end of
cooking time as a graphic.
4. Press to begin cooking.
5. The display will indicate the remaining time by filling the duration bar.
6. When cooking has finished, "COOKING FINISHED" appears on the display
and a buzzer sounds.
• For example: it is 9:00 a.m. and a duration of 1 hour and 15 minutes is
programmed. The programme will stop automatically at 10:15 a.m.
Current time
indicator
Programming delayed cooking
! A cooking duration must be set before the end of cooking time can be
scheduled.
! For the delayed programming to work properly, the clock should be set to
the correct time.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Press the icon twice; the end of cooking time will begin to flash.
3. Turn the control dial to adjust the end of cooking time; hold the dial in this
position to scroll through the numbers more quickly and make the setting
process easier. The display will show a graphic indicating the delayed start
in bar format.
4. Once you have reached the desired end time, press the
The delayed start bar will show the current time, the time remaining until
the start of cooking, the duration and the end of cooking time as a graphic.
5. Press to begin the pyrolysis schedule.
6. The text "POSTPONED COOKING START" and the time remaining will
appear on the display, moving the delayed start bar backwards.
7. Once cooking has begun, the display will indicate the remaining time by
filling the duration bar.
8. When the time has elapsed, "COOKING FINISHED" appears on the display
and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is
programmed, while the end time is set to 12:30. The programme will start
automatically at 11:15 a.m.
32
End Cooking
of cooking time duration
Duration
bar
Current time
indicator
icon again.
To cancel a schedule, press the
Practical cooking advice
! Do not place racks in position 1 and 5 during fan-assisted cooking. This is
because excessive direct heat can burn temperature sensitive foods.
! In the GRILL and FAN GRILLING cooking modes, particularly when using
the rotisserie spit, place the dripping pan in position 1 to collect cooking
residues (fat and/or grease).
MULTILEVEL
• Use positions 2 and 4, placing the food which requires more heat on 2.
• Place the dripping pan on the bottom and the rack on top.
GRILL
• Place the rack in position 3 or 4. Position the food in the centre of the rack.
• We recommend that the temperature is set to its maximum level. The top
heating element is regulated by a thermostat and may not always operate
constantly.
PIZZA
• Use a lightweight aluminium pizza pan. Place it on the rack provided.
For a crispy crust, do not use the dripping pan as this extends the total
cooking duration and prevents the crust from forming.
• If the pizza has a lot of toppings, we recommend adding the mozzarella
cheese to the top of the pizza halfway through the cooking process.
icon again.
End of cooking Cooking
time duration
Delayed
start bar
icon.