Package Contents
The package contains:
1 Air compressor
2 Li‑Ion battery packs (T2 models only)
1 Charger (T2 models only)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N‑models.
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear and eye protection.
Air tank capacity.
Approx. cut‑out pressure.
Air displacement.
Oil‑less pump.
Set outlet pressure to zero before the air hose is
attached or removed.
Risk of high temperatures.
CAUTION: the compressor contains some parts
which might reach high temperatures.
Risk of accidental start‑up.
NOTICE: The compressor could start
automatically in case of a black-out and
subsequent reset.
WARNING: Compressor unit may start
without warning.
Outdoor noise level
Important Information
Read and understand all of the operating instructions, safety
precautions and warnings in the Instruction Manual before
operating or maintaining this compressor. Most accidents that
result from compressor operation and maintenance are caused by
the failure to observe basic safety rules or precautions. An accident
can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing appropriate safety
procedures. Basic safety precautions are outlined in the "SAFETY"
section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions. Hazards
that must be avoided to prevent bodily injury or machine damage
are identified by WARNINGS on the compressor and in this
Instruction Manual.
Date Code Position (Fig. A)
The date code
13
, which also includes the year of manufacture,
is printed on a label on the rear of the tank.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Auto On/Off switch
1
Battery
2
Battery release button
3
Safety valve
4
Tank pressure gauge
5
One‑Turn regulator
6
Drain valve
7
Check valve
8
Quick‑connect coupler
9
Carry handle
10
Tank
11
Intended Use
Your compressor is designed for professional finish nailing and
stapling applications.
DO nOT use under wet conditions or in the presence
of flammable liquids or gases. DO nOT use or store the
compressor at temperatures below 0 °C.
Your compressor is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Use only D
e
EngLIsH
WALT battery packs and chargers.
33