SOMFY 100 io Manual De Instrucciones página 21

TUBELITE WHITE RECEIVER 100 io - TUBELITE WHITE RECEIVER 200 io
2.3. COMMISSIONING
This instructions guide only describes commissioning using a
For commissioning using any other io control point, refer to the corresponding instructions guide.
LED on
2.3.1. Programming the first Somfy io control point on an LED light
1) Power on.
2) Press the Up and Down buttons simultaneously on the io control
point, and follow procedure 2.3.1.1. or 2.3.1.2. according to the
reaction of the LED light(s).
2.3.1.1. An LED light comes on then goes out
Scenario no.1: It is for this LED light that the control point must be
programmed
• Briefly press the PROG button on this io control point.
The LED light comes on then goes out.
The io control point has been programmed for this LED light.
Scenario no.2: It is not for this LED light that the control point must be
programmed
• Press the Up and Down buttons again simultaneously on the io
control point, and repeat if necessary until the desired LED comes
on then goes out.
͉
If the output selected is not connected to any LED light, nothing will come on.
Select a different output.
• Briefly press the PROG button on this io control point.
The LED light comes on then goes out.
The io control point has been programmed for this LED light.
2.3.1.2. No LED light comes on
Press the Up button.
• If one or more LED light(s) come(s) on:
The io control point has been programmed for the LED lights lit.
- Go to section 2.3.2.
• If no LED light comes on:
Check the condition of the LED lights, the wiring, and try again.
- Go to section 2.4.3.
2.3.2. Activating/deactivating automatic switch-off
͉
Prerequisite: Commissioning has been completed using an io control point.
This function allows an LED light to be switched off automatically after 3, 6 or 12 hours of operation.
This duration can be configured (see 2.3.3.).
By default, this function is deactivated.
Copyright 2023 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
5175297A000_LEAF.TUBE WHITE REC 100200 io.indb 21 5175297A000_LEAF.TUBE WHITE REC 100200 io.indb 21
LED off LED "my" position
io control point.
Light intensity variation
1) 1)
ON
2) 2)
EN
2.2.1.1.
2.2.1.2.
2.3.2
2.4.3
21
27/10/2023 10:00:46 27/10/2023 10:00:46