Publicidad
Idiomas disponibles
Idiomas disponibles
STEAM CLEANING HARD FLOORS
NOTE: Always sweep or vacuum the floor prior to use to remove any loose
dirt or debris.
IMPORTANT: Do not use the cleaner without a microfiber pad attached to the
floor head.
NOTE: Do not use the carpet glide when cleaning hard floors.
1.
Plug the steam cleaner into the main power. The blue ON light will illuminate.
2.
After a few seconds the Pronto 300CS cleaner is ready for use.
3.
Recline the cleaner by placing a foot on the floor head and lowering the main
body towards the floor.
4.
To produce steam press the Steam Trigger Button. - It's best to use the
steam intermittently so that the pad does not become over-saturated with
water.
5.
Move the cleaner slowly backwards and forwards paying particular attention
to high traffic areas.
REFRESHING CARPETS
NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt
or debris.
IMPORTANT: Do not use the cleaner without a microfiber pad attached to the
floor head.
1.
Attach the carpet glide to the floor head.
2.
Plug the steam cleaner into the main power. The blue ON light will illuminate
3.
After a few seconds the Pronto 300CS cleaner is ready for use.
4.
Recline the cleaner by placing a foot on the floor head and lowering the main
body towards the floor.
5.
To produce steam press the steam release button. - It's best to use the
steam intermittently so that the pad does not become over-saturated with
water.
6.
Move the cleaner slowly backwards and forwards paying particular attention
to high traffic areas.
11
Publicidad
