Bosch GSL 2 Instrucciones De Funcionamiento Y Seguridad página 6

Ocultar thumbs Ver también para GSL 2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries.
Replace all old batteries at the same
time with new batteries of the same
brand and type.
DO NOT mix battery chemistries.
Dispose of or recycle batteries per
local code.
DO NOT dispose of batteries in fire.
Keep batteries out of reach of children.
Personal safety
Stay alert, watch what you are doing
and use common sense when operating
a tool. Do not use a tool while you are
tired or under the influence of drugs,
alcohol or medication. A moment of
inattention while operating a tool may
result in serious personal injury or
incorrect measurement results.
Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
DO NOT use the laser viewing
glasses as safety goggles. The laser
viewing glasses are used for improved
visualization of the laser beam, but they
do not protect against laser radiation.
DO NOT use the laser viewing glasses
as sun glasses or in traffic. The laser
viewing glasses do not afford complete
UV protection and reduce color
perception.
DO NOT use any optical tools such as,
but not limited to, telescopes or transits
to view the laser beam. Serious eye
injury could result.
DO NOT stare directly at the laser beam
or project the laser beam directly into
the eyes of others. Serious eye injury
could result.
Use caution when using tools in the
vicinity of electrical hazards.
Magnets
Keep the tool and laser
target away from cardiac
pacemakers. The magnets
of the tool and laser target
plate generate a field that
can impair the function of
cardiac pacemakers.
Keep the tool and laser target away
from magnetic data medium and
magnetically-sensitive equipment.
The effect of the magnets of the tool and
laser target plate can lead to irreversible
data loss.
Use and care
Use the correct tool for your
application. The correct tool will do the
job better and safer.
Do not use the tool if the switch does
not turn it on and off. Any tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Store idle tool out of the reach of
children and do not allow persons
unfamiliar with the tool or these
instructions to operate the tool. Tools
are dangerous in the hands of untrained
users.
Maintain tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the operation. If damaged, repair
tool before use. Many accidents are
caused by poorly maintained tools.
Use the tool, accessories, etc., in
accordance with these instructions
and in the manner intended for the
particular type of tool, taking into
account the working conditions and the
work to be performed. Use of the tool for
operations different from those intended
could result in a hazardous situation.
SAVE THESE INSTRUCTIONS.
-6-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rc 2

Tabla de contenido