Publicidad
Idiomas disponibles
Idiomas disponibles
Getting started
Step 1: Charging the battery pack
Battery pack
/CHG (flash/charge) lamp
You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.
Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.
1
Turn off your camcorder by closing the LCD screen after replacing the
viewfinder (HDR-CX700/CX700V).
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge)
lamp turns off when the battery pack is fully charged.
US
1
Align the mark on the DC plug
with that on the DC IN jack.
DC IN jack
AC Adaptor
Power cord
(Mains lead)
To the wall outlet
(wall socket)
DC plug
Publicidad
