Optika Italy D-290TB Serie Manual De Instrucciones página 11

7.4.2 B-292LD1/B-292LD1.50/B-293LD1/B-2932LD1.50
1. Insert the fluorescence attachment above the
frame and tighten the locking screw. (Fig. 5)
2. Insert the cable in the socket placed at the rear
side of the microscope. (Fig. 6)
3. Insert the optical head above the stand and tight-
en the screw. (Fig. 7)
• Hold the head with one hand during the lock-
ing in order to avoid that the head falls.
4. Insert both eyepieces into the tubes of the optical
head. (Fig. 8)
Page 11
F ig. 5 F ig. 5
F ig. 6 F ig. 6
F ig. 7 F ig. 7
F ig. 8 F ig. 8