Bissell PET HAIR ERASER Turbo 2475 Serie Guia Del Usuario página 12

Cleaning the Inner Cyclone Separator
1
Hold the Dirt Tank over
a trash container. Press
the bottom release
button to empty.
Maintaining the Pet TurboEraser® Tool
1
3
To reassemble, align two clips on each end
of paddle wheel with belt and pop back into
place. Place Brush Roll with belt back in.
Faceplate will not close properly if all parts
are not aligned correctly.
12 BISSELL.com
2
Twist cyclone counter-
clockwise and pull down
to remove from tank.
Twist gray collar
counter-clockwise, until
slot appears, and then
separate faceplate.
3
Tap separator against
inside of trash container
and rinse under warm water,
if necessary. Be sure to let
it dry completely before
placing back in Dirt Tank.
2
Paddle Wheel
Belt
Roller
Remove Brush Roll, belt and paddle
wheel. Inspect for damages and
replace if necessary.
4
To put faceplate back on, align the tabs
in the top of the cover and place it down
to "click" into place.