Bissell PET HAIR ERASER Turbo 2475 Serie Guia Del Usuario página 6

Using Your Vacuum
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
1
Turn vacuum ON by pressing Power Switch
(I - ON and O - OFF). Press Brush Roll Switch to
run the Brush Roll. (Brush Roll is on when light
on switch is illuminated). See page 13 to maintain
the Brush Roll.
NOTE: The Brush Roll will automatically shut off when vacuum is locked in upright
position. Recline to reactivate.
NOTE: In the unlikely event that hair wrapped around your Brush Roll, run vacuum back
and forth on clean carpet several times to help release any wrapped hair.
NOTE: Turn off the Brush Roll when vacuuming hard or delicate surfaces that may be
caught by the rotating brush. This could include hard wood, tiled floors, small area rugs,
or frieze carpets that have long delicate fibers or threads.
6 BISSELL.com
2
Step gently on base and pull
Handle back to recline.