cecotec TV LED A3 ALU30043 Serie Manual De Instrucciones página 59

ENGLISH
Remote control button functions
- Most of your TV's features are available through the menus that appear on the screen. The
remote control supplied with the equipment allows you to navigate through the menus
and configure all the general settings.
(On/Off button) Turns the TV on or off
To mute and unmute
Select the digital key number
To open the favourite channel list menu.
Enter the quick access menu.
To select tasks or Teletext pages.
(Microphone) Click to interact with the Google Assistant on the TV. (Available only
when the network connection is normal.)
To open the applications, move them or remove them from favourites
Show the TV setup menu
Confirm your selection.
(up, down, left, and right directional buttons) Highlights various items in the menu
system and adjusts menu controls.
Exit the menu and return to the previous menu
Goes to the home page
Click here to view the electronic program guide
Increase or decrease the volume
To enter the source selection interface.
To enter the interface of SMART function.
Channel up / down
Goes to the NETFLIX home page
Goes to the YouTube home page
Goes to the Prime Video home page
Goes to the Google Play home page
To select the Widgets
To select the apps
Inserting the batteries
- Open the cover on the back of the remote control. Correctly insert the batteries into the
remote control, respecting the "+" and "-" polarities. Refit the cover.
- The remote control is powered by two AAA LR03 1.5 V batteries. We recommend using only
alkaline batteries. Remove the batteries from the remote control if you are not going to
use it for a long time (more than one month). Used batteries must be disposed of safely.
Deposit them in specially designated collection containers to protect the environment.
Orientation
- Point the remote control at the infrared sensor on the front of the TV at an angle of 30° so
116 TV LED A3/ QLED V3+/ QLED V2
that it can receive the transmitted information.
- The remote control has a range of 6 meters.
5. TROUBLESHOOTING
Before contacting the after-sales service, perform the following basic checks.
Problem Possible causes
There is no The plug is disconnected.
electricity.
The power socket is
disconnected from the
mains.
There is no image or The image settings are
sound. incorrectly adjusted.
There is no audio.
There are no DTT Reception of digital
HD channels or the terrestrial television
image is distorted. channels (DTT) is only
possible in areas with
coverage.
Checks the proximity of a
transmitter.
Check the quality and
strength of the receiving
signal.
The remote control There are no batteries in
does not work. the remote control or the
batteries are dead.
Cannot read USB The format is not
removable media. compatible.
ENGLISH
Possible solutions
Make sure the power cable is
properly plugged into a power outlet.
Try connecting the plug to different
power outlets to check.
Check the brightness and contrast
settings of the image.
Check that Mute mode has not been
activated.
Check that the antenna cable is well
connected to the TV.
Resetting to factory settings.
Have a professional check your
installation.
Check that the batteries are correctly
inserted in the remote control.
Check the batteries. If they don't
work, replace them.
Check that the formats used
are compatible with this device.
Disconnect the removable device and
reconnect it. Please format the USB
media and try again.
TV LED A3/ QLED V3+/ QLED V2 117