Publicidad
Idiomas disponibles
Idiomas disponibles
Failure to follow the safety precautions may result in the risk of serious injury.
•
Use the bedside table only as described in this manual.
•
Install the bed table on a flat surface.
•
Store the bedside table in an indoor environment, away from moisture and dust.
•
This bedside table uses a high-pressure pneumatic cylinder to adjust the height of the bed top. Do not remove the
locking pin from the column assembly before use.
•
Before use, make sure that all parts are present and in good condition. In case of damage, please contact your dealer.
•
Carefully follow the assembly instructions and ensure that all components are properly secured before use.
•
Before use, tighten the brakes.
•
In case of damaged, broken or worn parts, please contact your dealer
MOUNTING
INSTALLATION
Place the bedside table on a clear surface and remove the packaging. Do not discard the packaging before the assembly is
completed.
STEP 1
Place the table upside down on a flat surface as shown.
Position the frame above the table top as indicated.
Insert the hexagon socket screws through the frame into the table top frame as indicated.
Use the M8 hexagonal key to tighten the screws
Version Juin 2023
.
STEP 2
Place the U-shaped frame upside down over the base as indicated on the left. Screw the 3 screws
through the plate, the base and the end of the base.
8
Publicidad
