Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 3
Turn the table over and place it on the floor. Make sure
that all parts are perfectly tightened before using the
bed table.
Remove the locking pin from the frame.
TABLE SLOPE
The Tasmanie 2-top bedside table must be placed on the floor before tilting the tabletop.
1. Pull the large tray out to tilt it. The ratchet mechanism allows 6 tilting positions.
2. Tilt the large tray to the desired angle.
3. To return the large tray to a flat position, tilt it to its maximum position to release the ratchet and then gently place the large
tray back in place.
CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk of serious injury.
•
Clean the product regularly with lukewarm water, a soft cloth and a neutral detergent.
•
Do not use cleaning products containing phenol or chlorine, as this may damage aluminium and polyamide materials.
•
Dry with a clean, dry soft cloth.
Version Juin 2023
HEIGHT ADJUSTMENT
Simply pull the table top upwards to adjust the table height.
To lower the table, pull the adjustment lever, adjust to the correct height and then release the
lever.
9
Publicidad
