Publicidad
Idiomas disponibles
Idiomas disponibles
8
When the
completely full, it must be
emptied before continuing
juicing. See disassembly
instructions.
10
Remove the
from under the spout. You
may close the
Lid
and store juice in the
Pitcher
NOTE:
To do this, you'll first need to
Juice Pitcher
tip the
slight angle, so that the lid's large
hole has some separation from the
spout, then you can slide out the
pitcher. This is the reverse of what
you did during assembly.
16
Pulp Basin
is
Juice Pitcher
Juice Pitcher
if desired.
forward at a
9
To stop juicing, press the speed
at which you are currently
juicing. To completely power off
the juicer, press the center power
button and wait for the Sieve to
stop spinning. Unplug the unit
after each use.
11
Immediately move the
Drip Spout
over the spout to avoid any
Juice
residual drips onto the unit
or onto the surface below the
juicer.
TIP:
left hand to pull the
away, while using your right hand
to swing the
down and over the spout opening.
cover downward
We recommend using your
Juice Pitcher
No-Drip Spout
No-
cover
Publicidad
