Invacare Aquatec ORCA Manual Del Usuario página 12

Aquatec® ORCA / ORCA F / ORCA XL
Risk of Damage
– Ensure that the suction cups are mounted
properly.
– Ensure that the battery in the hand control is
charged.
– When lifting bath lift components, remember
to correctly assess the weights, refer to 10.1
Dimensions and weight, page 26.
– If a handrail is mounted at the inside of the
bathtub, use the optional side flap diverters.
1.
Put rear suction cup with threaded bolt A on sleeve
nut B and screw it in. Screw as far as the suction cup
fits the orientation on the graphic.
12
Fig. 4-2
2.
Put toggle A through keyhole bore C and place it in
the corresponding recess. Feed head of suction cup B
through bore C and pull the suction cup forwards. Fix
suction cup with red lid D.
3.
Place the seat B on the bottom of the empty bathtub.
Ensure that the spindle foot retainer C is pointing
towards the end of the bathtub opposite the drain A.
Fig. 4-3
Fig. 4-4
1574469-F