3
3. Fill the clean water tank with water.
When deep cleaning is required, it is
recommended to clean with
BLACK+DECKER cleaning tablets,
Model #: BXCTXA030 (Not included)
5
Power Button
5. Press the power button to turn it on.
Switch to ECO/MAX/Dry Vacuum mode
according to floor types by pressing
the mode button.
7
12
Mode Button
7. Place the appliance on the charging base vertically
after use for charging. Then start the cleaning
process (located on the next page).
Note:
1. Do not vacuum foamed liquid.
2. Do not add cleaning solutions that are prone to
foaming.
3. Do not tilt the machine (less than 45°C) to one
side or lay it flat to prevent dirty water from
entering the motor.
4. Do not fill hot water in the clean water tank.
5. Do not soak or rinse the appliance and the
charging base with water.
4
4. To assemble the clean water tank,
align the bottom of the clean water
tank with the groove and push the
tank until it "clicks" into place.
6
< 160°
6. Tilt the angle properly. Do not
recline the appliance more than
160° to protect against water
leakage.