Publicidad
Idiomas disponibles
Idiomas disponibles
!
WARNING: Turn unit off and remove from charging base before performing
any maintenance.
For optimal performance and to prevent odors, always clean and dry dirty water
tank, filter, roller, roller cover completely after each use.
After each use, remove the dirty water tank and lightly wipe any dirt
inside the tube and on the sensor with a washcloth.
——Cleaning the Dirty Water Tank & Filter——
1
Press the dirty water tank release
button to remove the dirty water tank.
3
Rinse the dirty water tank cover and
the dirty water tank with water, and
use the cleaning tool (not included)
to clean the dirty water tank.
14
DAILY MAINTENANCE
——Debris Channel——
2
Remove the filter from the dirty water tank
cover, pull out the dirty water tank cover
upwards and pour out the dirty water.
4
Ensure the dirty water tank is clean
and completely dry, assemble it into
place. (Directions on page 9)
Foam Filter
Dirty Water Tank Cover
Publicidad
