BGS technic 80002 Manual De Instrucciones página 4

Installing Tool Set for Ford 2.0 ECOblue
TOOLS
1. Support bolt, to be used as OEM 303-1635/3
2. Base plate, to be used as OEM 303-1635/1
3. Fastening screws with nuts
4. Pressure screw, to be used as OEM 303-1635/2
5. Cover
6. Mounting screw, to be used as OEM 303-1635/6
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool set is used to remove and install the diesel high-pressure pump. The high-pressure pump
sprocket is held in the correct position and the engine control times do not need to be adjusted. The
tools included are suitable for the following models:
Manufacturer
Ford
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Injection Pump Removal and
Model Year
Transit
Transit Custom 2016-
Tourneo Custom
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Engine
2.0 TDCi YLFS / YMFS / YNFS / YLF6 / YMF6
ECOblue YNF6 / YLR6 / YMR6 / YNRS
BGS 80002
Engine code
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed