Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 95-3309B
Chevrolet Spark 2013-up
KIT FEATURES
• DDIN radio provision
• Painted Matte Black
KIT COMPONENTS
• A) Radio Trim Panel • B) Radio Brackets • C) (10) White Plastic Panel Clips
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • GMOS-044 GM interface
Antenna Adapter: • 40-EU55 antenna adapter
METRA. The World's best kits.
APPLICATIONS
95-3309B
C
™
1-800-221-0932
Dash Disassembly
– Chevy Spark 2013-up .......................................... 2
Kit Assembly
– DDIN radio provision ............................................ 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Small flat-blade screwdriver
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
Table of Contents
Publicidad
Manuales relacionados para Metra 95-3309B
Resumen de contenidos para Metra 95-3309B
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-3309B APPLICATIONS Table of Contents Chevrolet Spark 2013-up 95-3309B Dash Disassembly – Chevy Spark 2013-up .......... 2 Kit Assembly – DDIN radio provision ..........3 KIT FEATURES • DDIN radio provision • Painted Matte Black KIT COMPONENTS •...
- Página 2 95-3309B Dash Disassembly 1. Unclip and remove the radio trim panel. (Figure A) 2. Remove (4) Phillips screws securing the factory radio and remove from dash. (Figure B) Step 5 3. Unclip and remove the vents from the factory panel. (Figure C) Step 5 4.
- Página 3 95-3309B Kit Assembly DDIN radio provisions 1. Attach the factory vents and hazard button to the Metra trim panel. (Figure A) 2. Attach the upper display shroud the Step 2 Metra trim panel with the factory screws. (Figure A) 3. Attach the provided (10) panel clips to Step 2 the legs of the Metra trim panel.
- Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-3309B NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
- Página 5 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-3309B AplicAciones Indice Chevrolet Spark 2013 y mas 95-3309B Desmontaje del tablero – Chevrolet Spark 2013 y mas ........ 2 Ensamble del kit – Provisión de radio DDIN ......... 3 cArActerísticAs del kit • Provisión de radio DDIN •...
- Página 6 95-3309B Desmontaje del tablero 1. Desenganche y quite el panel de la moldura del radio. (Figura A) 2. Desenganche y quite las rejillas del aire acondicionado del panel de fábrica. (Figura B) Paso 5 3. Desenganche y retire el botón de...
- Página 7 (Figura A) Paso 2 3. Instale los (10) ganchos del panel provistos en las patas del panel de la moldura Metra. 4. Localice el arnés de cables de fábrica en el tablero. Metra recomienda el uso de un...
- Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-3309B EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.