Metra 95-3309B Instrucciones De Instalación página 3

DDIN radio provisions
1. Attach the factory vents and hazard
button to the Metra trim panel. (Figure A)
2. Attach the upper display shroud the
Metra trim panel with the factory screws.
(Figure A)
3. Attach the provided (10) panel clips to
the legs of the Metra trim panel.
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Attach the radio brackets to the
aftermarket radio using the screws
supplied with the radio, then mount the
assembly into the sub dash. (Figure B)
6. Reassemble dash in reverse order of
disassembly using the Metra trim panel
instead of the factory trim panel.
Kit Assembly
Step 2
Step 1
(Figure A)
95-3309B
Step 1
3
Step 2
(Figure B)