Dash Disassembly - Metra 95-3309B Instrucciones De Instalación

1. Unclip and remove the radio trim
panel. (Figure A)
2. Remove (4) Phillips screws
securing the factory radio and
remove from dash. (Figure B)
3. Unclip and remove the vents from
the factory panel. (Figure C)
4. Unclip and remove the hazard
button from the trim panel.
(Figure C)
5. Remove (5) Phillips screws
securing the upper display shroud
from the factory panel. (Figure C)
Continue to kit assembly

Dash Disassembly

(Figure A)
(Figure B)
95-3309B
Step 5
(Figure C)
2
Step 5
Step 3
Step 4