Warning Indicators; Stabilizing The Projection Tv - Sony KL-40WA1 Instrucciones De Funcionamiento

Warning Indicators

When a problem occurs, the indicator flashes as follows.
Attempt the solution recommended for the given problem.
Cause
The lamp does not light
(when the lamp is damaged)
The lamp does not light
(when the lamp is not
damaged)
The cover of the filter or the
lamp is removed.
The fan for cooling stops.
If the lamp flashes in a way not described above, consult your nearest Sony service centre.

Stabilizing the Projection TV

After setting up, secure the projection TV to a wall, etc., with the supplied brackets, for safety
purposes.
1 Mount the two supplied brackets with the screws to the upper rear side
of the projection TV.
2 Pass a strong cord or a chain through each bracket mounted in 1, and
then secure to a wall or a pillar, etc.
Indicator flashing patterns
The indicator flashes.
The u indicator flashes twice.
Flashing continues in this manner.
The u indicator flashes three times.
Flashing continues in this manner.
The u indicator flashes four times.
Flashing continues in this manner.
Bracket (supplied)
GB
31