Publicidad
Idiomas disponibles
Idiomas disponibles
Door handle installation (continued)
Chef Door: Only for FBOEL1388-30: Lower oven
Step 1:
Open the oven door and remove the 2x black rubber
caps located at the back of the oven door. Be careful not
to scratch the enamel. DO NOT THROW AWAY the cap
Left Side
Step 3:
Position the handle holder correctly to accept the screw
bolt on the outside of the oven door, then tighten the
screw. Do not over tighten the screw.
Oven rack installation
1-Open the oven door
10
Right Side
2- Pull the rail outwards
Step 2:
To reach the embedded screw, insert the screwdriver
into the hole and push the screw forward until the
threads appear on the other side.
Step 4:
Repeat steps 1-3 for the other doors, then replace the
black rubber cap.
Left Side
3- Make sure the first hinge slides on
top of the arm, the second hinge at the
bottom, and the two front should be on the
top of the arm. Push the rack completely
towards the back. This complete the
installation.
Right Side
Publicidad
