cecotec POWER ESPRESSO 20 RETRO GREEN Manual De Instrucciones página 46

ENGLISH
Automatic shut-off function
If no switch is operated and the knob is not turned for 2 minutes, the coffee machine will
switch off automatically.
4. CLEANING AND MAINTENANCE
Make sure to unplug the coffee machine and allow it to cool down completely
-
before cleaning it.
- Regularly clean the main housing and water tank with a sponge. Thoroughly wash
and dry the drip tray and grid.
Please note
Do not use alcohol or solvents to clean the machine. Never immerse the housing in water for
cleaning.
Remove the metal funnel from the filter by turning it clockwise and remove any
-
coffee residue. Clean with water and detergent and dry thoroughly.
Wash all accessories and dry them thoroughly.
-
Cleaning mineral deposits
1. If the machine has been in use for the last 3 months, it is necessary to clean the
mineral deposits (limescale).
2. Fill the tank with water and descaler up to the MAX level (for the amount of
descaler follow the instructions on the package or manufacturer's instructions).
3. Heat the above solution following the steps in the "PREHEATING" section.
4. Once the preheating process is completed, the power indicator light will stop
flashing and will remain steady.
5. Turn the coffee switch to the ON position to brew two cups of the solution.
6. Turn the steam switch to the on position and wait until the corresponding indicator
light lights up. Emit steam for 2 minutes by turning the steam knob to the steam/
hot water position; then, turn the knob back to the off position to stop generating
steam. Turn off the power switch to stop the machine completely, leaving the
descaler or citric acid solution in the machine for at least 15 minutes.
7. Repeat steps 5 and 6.
8. Turn the coffee switch to the on position; the coffee indicator light will remain
steady. In this way, the machine will start preparing the solution until there is no
descaler left.
9. Fill the tank with clean water up to the MAX level and then dispense water until
there is no water left in the tank.
10. Repeat step 8 to ensure that the steamer is thoroughly cleaned.
46