Profi Cook PC-MS 1273 Manual De Instrucciones página 11

5. There may still be dust or production residues on the appliance. We recommend
that you clean the appliance as described under "Cleaning".
(Batteries not included)
Observe the symbols on the unit housing.
1. Open the battery compartment by briefly turning the upper half of the housing.
2. Insert 2 batteries of type AA / LR6. Please ensure that the polarity is correct (see
battery compartment / outside of battery compartment)!
- Do not use rechargeable batteries / accumulators.
3. Close the battery compartment again. The mark on the upper half of the housing
must point to the symbol .
1 × Milk frother
1 × Stand
NOTE:
• For best results, use milk with a 3.5 % fat content. Milk with a fat content of
1.5 % as well as soya milk or lactose-free milk will produce less froth.
• Fill the container to just one fourth with milk, as the volume increases consider-
ably during the frothing.
1. Fill the milk into a suitable container, for example a glass.
2. Completely immerse the stirring rod with the spring into the milk.
3. Press the button on the top of the appliance once to switch the appliance on.
4. Move the stirring rod in the container up and down evenly, until the desired foam
volume is created. The spring must always remain in the liquid with this.
5. Press the button again to switch off the appliance.
6. Wait for standstill of the spring, before removing the stirring rod from the foam.
7. Use a spoon to remove the milk froth.
8. Immediately clean the appliance after each use.
PC-MS1273_IM
Inserting the Batteries
Scope of Delivery
Operation
11
31.07.23