Use For The Intended Purpose; Residual Risk; Safety And Responsibility At Work; Further Safety Instructions - Von Arx FR 200 GENUS Instrucciones De Manejo

Idiomas disponibles

FR 200 • Operating Manual

Safety stickers on the machine

Warning fire hazard substances

(For internal combustion engines only)

Warning: hot surface

Safety shoes must be worn

Ear protectors must be worn

Damaged or lost safety stickers must be replaced immediately. These stickers are obtainable

from your Customer Service Center.

USE FOR THE INTENDED PURPOSE

The machines are designed exclusively to treat all kinds of horizontal surfaces. Any other use

does not correspond to the intended purpose. The manufacturer declines all liability for damage

caused thereby. Surface preparation machines always attack the surface to be treated. They

are therefore not suitable for cleaning sensitive surfaces (such as tiled floors) (See chapter

"Field of application" on page 8).

There is still a residual risk owing to differing characteristics of the floor coverings, even if the

machine is used in accordance with applicable regulations. If you detect irregular cutting, you

must reduce the working depth or check the cutting drum and cutters.

• Make your contribution to safety at the workplace.

• Report any discrepancy deviating from normal working immediately to the responsible

person.

• Perform all the work with an awareness of the need for safety.

Make sure to comply with your local or national regulations, standards and directives.

Depending on the cutter type, hard, brittle to firm or elastic surface materials can be worked e.g.:

• Asphalt and cast asphalt surfaces

• Concrete and cement, synthetic stone, floor tiles

• Screeds of cement, wood cement, ceramic etc.

• Natural stone

• Metals

• Thermoplastic materials

Surfaces made of highly elastic soft materials or fabrics and fiber materials cannot be worked,

or can only be worked with certain limitations e.g.:

• Latex, rubber, soft plastics and foam materials

• Wood, carpets and woven materials

Use for the intended purpose

Warning: electric shock hazard

Warning: cutter shaft

Study the Operating Manual

Use protective googles

Tabla de Contenido