Rehingeing The Door - Electrolux ARCTIS 75278-5 GA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Rehingeing the door

The side at which the door opens can be changed from the right side (factory
adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appliance
may not be connected to the mains. Remove plug from the mains
beforehand.
Procced as follows:
To carry out the following operations,
we suggest that this be made with
another person that will keep a firm
hold on the door of the appliance
during the operations.
Gently lay the appliance on its back.
Procced as follow:
1.
Remove the ventilation grille.
2.
Remove the bottom hinge (A) by
unscrewing the fixing screws.
3.
Remove the door.
4.
Unscrew the pin of the bottom
hinge (f) and refit it on the
opposite side.
5.
Unscrew the pin of the upper
hinge (d) and refit it on the
opposite side.
6.
6) Insert the door in the upper
hinge and refit the upper hinges
(A).
Pay attention that the border of
the doors are parallel to the top
border, otherwise adjust the
position of the lower hinge of
the door (A).
30

Publicidad

Tabla de contenido
loading

Tabla de contenido