If The Refrigerator Cannot Pass Through A Door During Installation, Follow These Steps - Electrolux ENL62610S Manual De Usuario

If the refrigerator cannot pass through a door during installation,
follow these steps
Removing Freezer Door
Remove front bottom cover fi rst, if it is
attached.
1. Remove the bottom cover fi rst. Pull out
the left collar of the coupling fi rst, then
hold the coupling and pull out the left
water tube. (Dispenser Models Only)
2. Unscrew top hinge cover with a
screwdriver.
3. Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect the harness wires.
4. Lift up the front of hinge to remove.
(After the hinge is removed the door can
fall down forward. Be careful!)
5. Be careful not to damage the water line
when removing the door.
Removing Refrigerator Door
1. Unscrew top hinge cover with a
screwdriver.
Insert a thin screwdriver into the side
groove of the cover to remove.
2. Turn top hinge fastener
counterclockwise 3~4 times.
Disconnect harness wires.
3. Lift up the front of hinge to remove.
(After the hinge is removed the door can
fall down forward. Be careful!)
4. Lift the door straight up to remove.
electrolux 67
EN